概述表明:煤礦業用防火操縱高壓電纜

詳情講述: 執行力標準的 Standards implemented : Q/3210HL33.1-Q/3210HL33.2-2005 形號、公司名稱及用到面積 Model descriptions and Use scope 型 號Model 名 稱//www.anhdl.com Descriptions 使 用 范 圍 Scope of application MKVV 礦山用聚氯乙稀電絕緣聚氯乙稀護線套操縱纜線 PVC insulated PVC sheathed control cables for use in mines 水井中普遍管理軟件中 General control system in mines MKVV22 礦山用聚氯丁二烯耐壓帶鋼鎧裝聚氯丁二烯護線套設定通信電纜 PVC insulated steel tape armored PVC sheathed control cables for use in mines 斜井中似的抑制設備能夠接受千萬波動力和壓 General control system cables are under some impact and pressure in the mine MKVV32 礦山用聚氯丁二烯耐壓細不銹鋼絲鎧裝聚氯丁二烯保護套的控制纜線 PVC insulated fine steel wire armored PVC sheathed control cables for use in mines 井下中一般來說管控程序能接受千萬拉力 General control system cables are under some pulling force in the mine MKVV42 媒礦用聚氯乙稀絕緣層粗鐵絲鎧裝聚氯乙稀絕緣護套管控數據線 PVC insulated thick steel wire armored PVC sheathed control cables for use in mines 立井中通常設定操作系統能所能承受比較大拉力 General control system cables are under big impact pulling force in the mine MKVVP 煤廠用聚氯丁二烯絕緣性金屬絲編結關閉聚氯丁二烯保護套操控纜線 PVC insulated copper wire weave shielded PVC sheathed control cables for use in mines 掘進工作面中強電磁爐干憂區作一般的控制 Strong electromagnetism interference region as general control in mines MKVVP2 煤礦業用聚氯氯丁二烯絕緣層銅帶閉屏聚氯氯丁二烯保護套控住數據線 PVC insulated copper tape shielded PVC sheathed control cables for use in mines 煤礦中強電磁能影響區作尋常抑制 Strong electromagnetism interference region as general control in mines MKVVR 煤業用聚氯丁二烯絕緣層聚氯丁二烯護線套軟控住低壓電纜 PVC insulated PVC sheathed soft control cables for use in mines 斜井中一定要求位移領域作一樣操縱 Request migration situation as general control in mines MKVVRP 媒礦用聚氯乙稀絕緣電阻銅線編織機屏蔽了聚氯乙稀保護套軟操作電線 PVC insulated copper wire weave shielded PVC sheathed soft control cables for use in mines 巷道中應求運動且強磁感應騷擾區作一樣設定 Request migration situation and strong electromagnetism interference region as general control in mines 運行基本特性 Service characteristics 電攬導體不斷同意的工作任務環境溫度 Long-term service temperature of the cable conductor 70℃ 固定線電壓U0/U Rated voltage U0/U 450/750V 電攬敷設工作溫度 Cable laying temperature ≥0℃ 纜線的最長微彎半經 Minimun bending radius 無鎧裝層的≥纜線外徑的6倍，有鎧裝層或銅帶屏幕的≥纜線外徑的12倍， Non armored ≥outer diameter of cable 6 times armored layer or copper tape shielded≥outer diameter of cable 12times 有關閉層的軟通信通信電纜≥通信通信電纜外徑的6倍 Shielded layer soft cable ≥ outer diameter of cable 6 times 電攬機構構造圖 IIIustration of cable structure 煤業用耐油管理通信電纜MKVV 型 號 Model 固定額定值 V Rated voltage 導體標稱剖面 mm2 Conductor nominal sectional 0.5 0.75 1.0 1.5 2.5 4 6 10 芯 數 Core number MKVV MKVVP 450/750 - 2-61 2-14 2-10 MKVVP2 - 4-61 2-14 4-10 MKVV22 - 4-61 2-14 4-10 MKVV32 - 7-61 4-61 2-14 4-10 MKVV42 - 16-61 7-61 2-14 4-10 MKVVR 4-61 - - MKVVRP 4-61 4-48 - - 注Note：安利的芯數款型Recommendation core series：2、3、4、5、7、8、10、12、14、16、19、24、27、30、37、44、48、52、61芯(core) 電線電纜最主要的方法性能參數 Major technical performances 1、 電線電纜導體直流電壓內阻及絕緣層內阻 Cable conductor DC resistance and insulated resistance 標稱截面積 nominal sectional (mm2) 導體結構特征 Conductor structure +20℃導體電流電容(≤Ω/Km) Conductor DC resistance at 20℃ +20℃絕緣帶電容(≥MΩ·Km) Insulated resistance at 20℃ 種 類Type 根數/單線標稱內直徑(mm) core No./ single nominaldiameter 不鍍錫 Untinned 鍍錫 Tinned 0.5 5 16/0.20 39.0 40.1 15 0.75 1 1/0.97 24.5 24.8 12 0.75 2 7/0.37 24.5 24.8 12 0.75 5 24/0.20 26.0 26.7 12 1.0 1 1/1.13 18.1 18.2 11 1.0 2 7/0.43 18.1 18.2 10 1.0 5 32/0.20 19.5 20.0 10 1.5 1 1/1.38 12.1 12.2 11 1.5 2 7/0.52 12.1 12.2 10 1.5 5 30/0.52 13.3 13.7 10 2.5 1 1/1.78 7.41 7.56 10 2.5 2 7/0.68 7.41 7.56 9 2.5 5 50/0.25 7.98 8.21 9 4 1 1/2.25 4.61 4.70 8.5 4 2 7/0.85 4.61 4.70 7.7 6 1 1/2.76 3.08 3.11 7 6 2 7/1.04 3.08 3.11 6.5 10 2 7/1.35 1.83 1.84 6.5 2、低壓電纜別的基本方法耐熱性 Other major technical performances 技術參數Model:MKVV22、MKVV32、MKVV42、MKVV、MKVVR、MKVVP、MKVVP2、MKVVRP 序 號 Serial number 活動 Items 高技術的性能 Technical performances 1 +20℃線芯電流熱敏內阻(≤Ω/Km) Core DC resistance at 20℃ 見上表 See above table 2 +20℃絕緣內阻熱敏內阻(≥MΩ·Km) Insulation resistance at 20℃ 見上表 See above table 3 5min耐工頻座談會電壓降實驗設計 5min power frequency alternating current pressure test 芯-芯Core-Core 芯-閉屏Core-Shield 芯-鎧裝 Core-Armor 3000V不損壞 3000V no breakdown 4 單根縱向引燃物測試 Single wire burning test MT386 5 成束引燃物測試 Group burning test 符合標準GB/T18380標淮中B類成束引燃物測試標準 Conforms to GB/T18380 standard B kind group burning test